Cement and Concrete Testing Equipment

Product Details:

Brass Sieves are fabricated out of spun brass, without joint frame, double folded bottom, having beading at top, tightly fitting with each other (Endcott pattern), with brass wire mesh, our own brand.

• 10mm
• 4.75mm
• 2.36mm
• 1.18mm
• 12.5mm
• 600 micr
• 300 micr
• 150 micr
• 20mm
• 1mm
• 425 micr
• pan
• lid.

Specifications:

Product Details:

GI Sieves
Size 12"
Size 18"

Additional Information:

• Item Code: PARAS
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: ROORKEE

Product Details:

Specification:

Comprises a 1 kg. glass jar with brass cone. Locking ring and rubber seal.
Spare: Rubber seal

Additional Information:

• Production Capacity: 10
• Packaging Details: corrugated box

Product Details:

Made of Cast Iron
Size 15x15x15cm

Product Details:

Mechanical Sieve Shaker
Size 8"
12"
18"
8x12"
12x18"
Motorized With Godrej Motor also Available

Additional Information:

• Item Code: 9835
• Production Capacity: 10
• Delivery Time: 10 Days`
• Packaging Details: Box

Product Details:

Placom Digital Planimeter KP-90N-Series with the most advanced functions and perfect reliability. The most standard model of  Koizuimi Placom N-Series has made the excitingly highest attainment in the history of Placom Digital Planimeter KP-90N ever made. Measuring capacity is remarkably enlarged. Measuring by 6-digit pulse count enables to measure 100 times larger accumulative area than ordinary planimeters. Easy calculations of Cumulative and Average Value Measurement.

Additional Information:

• Production Capacity: 10
• Delivery Time: 30 DAYS
• Packaging Details: BOX

Product Details:

Our clients can avail from us a comprehensive range of Deflection of Truss Apparatus.

Specification:

• Apparatus should consist of 4 panels of a PRATT steel truss, each panel being 40cm in horizontal direction and 30cm in vertical direction. Load can be applied on each panel point. All tension members should be provided with detachable springs so as to obtain appreciable deformation of the member. Direction of the diagonal members may be changed. Apparatus can be used to illustrate visually the nature of forces set up in various members of the Truss. Apparatus to be supplied should be complete with a supporting stand and a set of weights.

Product Details:

IS 4031,5516,1727&4828,ASTM C-204, BS 4359-2
Specification:
Designed to find out specific gravities of semi liquids like mud and other liquids having densities in the range 0.8 to 2.5.It has a stainless steel bam calibrated specific gravities from 0.8 to 2.5.A stainless steel cup with lid and overflow vent is fitted on one side of the beam.A counter weights with cursor slides over the graduated scale.The beam has a knife-edge at centre which rests in a falcrum fitted in the stand.Leveling screws and spirit level are fitted to the stand.
Spares & Accessories(On extra Cost):
Punch to cut filter paper discs.Non-perforated disc.Suction bulb,Mercury.

Product Details:

IS 7535 1986,ASTM C 183,AASHTO T 127
Specification:
This is a brass tube approximately 53cm long and 2.8cm I.D. with a wooden handle.Total length approximately 73cm.The tube has the sharp angular edge which conveniently pierces cement bags.An air hole of approximately 3mm dia is drilled on the tube near handle.Total sample collected at one time is 300cm approximately.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7 DAYS
• Packaging Details: CORRUGATED BOX OR

Product Details:

Specifications:

Product Details:

Testing Equipment Manually (Hand) Operated fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer.

Specifications:

Product Details:

Just represents an economical alternative to the Justy series of our building materials test platforms, for many testing tasks. This innovative system is a single-purpose compression test plant (Optionally with bending unit for European Standards) for efficient serial testing of mortar specimens. If required, the Test pert intelligent software for graphical and statistical test evaluations together with PC can also be connected to this versatile system. Customers who have been regularly using this system for their quality control purposes for many years include a worldwide list of cement companies, i.e. Leafage, Blue Circle, Implementing, etc. and many other universities and research laboratories.

Special Features:

• High quality, rigid load frame
• Servo-hydraulic control (Closed Loop)
• Intelligent control system
• A variety of software options
• Easily expandable in the future

Product Details:

Silent Features:

• Speeds: Straining at variable speeds to suit wide range of materials
• Facilities for Test Motor: driven threaded columns for quick and convenient adjustment of lower cross head to facilitate rapid fixing of test specimen
• Auto graphic Recorder: Simultaneous roll auto graphic recorded supplied as standard to enable study of the behaviors of materials
• Ideal Dial: High reading accuracy due to large size ideal design of dial.
• Large Columns: Large effective clearance between columns enables testing of standard specimens as well as structures.
• Easy Changeability: Easy change from plain to treated and screwed specimens
• Simple and safe: Simple to operate
• Robust Construction
• Wide range of standard and special attachment accessories available.

Product Details:

We offer premium quality Ductility Testing Machine, which is used, for determining the ductility of asphalt, cut bitumen and blown type bitumen.

Specification:

• Ductility Testing Machine Electrically Operated for determining the ductility of asphalt and bitumen. The ductility of bitumen is expressed as the distance in centimeters to which a standard briquette can be elongated before the thread thus formed breaks under specified conditions. The ductility testing machine is designed to test three specimens simultaneously, and consists of a bath thermostatically controlled with inlet and outlet taps and is equipped with an electric pump circulator & heater and carriage moving over a lead screw. Fixed and movable brackets are so positioned that specimen is submerged in water throughout. A clutch arrangement is made to stop the movement of the movable bracket when rapture of the specimen is noticed. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation and provides two rates of pull/ travel, i.e., 50mm/min and 10 mm/min in the machine.

Product Details:

The unit consists of a pressure vessel with clamp for sealing cap, capacity. Rubber sealing gasket,pressure gauge calibrated in percentage moisture content on the wet weight basis, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of 4 steel balls for thorough mixing . Complete in highly polished wooden carrying case with handle.

Spares:

• Carbide reagent, in bottles of 500 gms
• Each available on extra cost

Product Details:

We are leading supplier and exporter of Air Entrainment Meter.

Specification:

• Entrainment of a small amount of air in the cement concrete has been found to improve considerably the durability of concrete. Further, when use of admixtures is made to increase workability of concrete, a check of the air content is required to ensure that the percentage of air remains between 1 to 2% to get the optimum performance of the concrete structure. Air Entrainment Meter is having a capacity of 0.005 m3 (5 Liters), suitable for aggregate size up to 38mm. Each air entrainment meter is supplied complete with a calibrating cylinder, pressure gauge, funnel, measuring jug, straight edge and a hand pump.

Product Details:

Standards:IS 2386 (PART IV) ASTM C 131, AASHTO T-96

Specification:

The machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 R.P.M. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test. Complete with Abrasive Charge consisting of a set of Twelve hardened steel balls, approximately 48mm dia. Suitable for operation on 440 V, 3 Phase, 50 cycles, A.C. Supply.

Product Details:

Specification:

It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 RPM.
Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two Conical Hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two containers with weights are supplied to keep the specimens pressed against the rotating disc.
Suitable for operation on 220 V, 50 cycles, A.C. Supply.

Product Details:

Mortar Cube Vibrating Machine is used for vibrating the mix in molds at a frequency of 12,000 ± 400 cycles per minute. The vibrator is mounted over 4 coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The center of gravity of the vibrator, including the cube mold, is either at the center of eccentric shaft or within 25mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube molds.

Specifications:

Product Details:

The apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a FHP Motor. The bearing is freely supported on the shaft and sealed at the motor end. The speed of the motor is controlled accurately by the speed control unit and it can be made run in both directions. Twelve equal-spaced pressure taping around the circumference and four along the axis are provided and are connected to manometer by PU Tubing so that the pressure head of oil in all tubes can be observed at a time. The bearing can be loaded by attaching weights to the arm supported beneath it.

 

Experiments:

• To study the pressure profile of lubricating oil at various conditions of load and speed
• Plotting the Cartesian polar pressure curves
• To measure the frictional torque and power transmit
• Tachometer to find out RPM of journal Oil SAE 40 about 5 Ltrs.

 

Product Details:

This equipment is designed for carrying out the experiment for balancing a rotation mass system. The apparatus consists of a steel shaft fixed in a rectangular frame. A set of four blocks with a clamping arrangement is provided. For static balancing, each block is individually clamped on shaft and its relative weight is found out using cord and container system in terms of number of steel balls. For dynamic balancing, a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. The block are clamped on shaft is rotated by a motor to check dynamic balance of the system. The system is provided with angular and longitudinal scales and is suspended with chains for dynamic balancing.

 

Experiments:

• To balance the masses statically and dynamically of a single rotating mass system
• To observation of effect of unbalance in a rotating mass system

Product Details:

Specifications:

Product Details:

we are dealing in Other Cement and Concrete Testing Equipment.

Features:

• Los Angeles Abrasion Testing machine
• Aggregate Impact Tester
• Diamond core drilling machine
• Flow table
• Hydraulic Jacks
• Proving Ring
• Mould

Product Details:

Meeting the demands of customers as a manufacturer and supplier, we are engaged in providing Other Bitumen Testing Equipment.

Type:

• Benkelman Digital Apparatus
• Marshall Stability Testing Apparatus
• Centrifuge Extractor
• Viscometer
• Abels Flash Point Apparatus
• Pen sky marten Flash Point apparatus
• Flash and Fire point Apparatus
• Digital Penetrometer
• Distillation Apparatus

Product Details:

To move with the pace of time, we offer an excellent range of Concrete Permeability Test Apparatus.

Specification:

• The permeability is determined on cement, mortar and concrete specimens, either casted in the laboratory or obtained by cutting out cores from existing structures. Each cell of concrete permeability test apparatus is made of steel and provided with a top plate and funnel at the bottom having gasket seals held in position through bolts and nuts. Each test stall has its own control system, operating pressure gauges and valves. The multi-unit Permeameter are so designed that all tests can be performed at the same time using either the same head or varying head pressure as each test stall is provided with its own pressure regulator and control. The control instruments are mounted on a sturdy welded structural stand. All multi – units are provided with end pressure gauges. Each concrete permeability test apparatus is provided with chamber pressure gauges 0-20 kg/cm² and test pressure gauge of 0-15kg/cm². Pressures are applied using any available pressure line at the site or a 150PSI Electric Air Compressor.

Product Details:

Core cutter with dolly and rammer

Product Details:

Specification:

It is designed to carry a load of 140 kg . The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 500 x 500 mm and has stops along its edges to prevent moulds from walking off the table during vibration . A crass arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the between a maximum of 3600 vibrations down to
2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing frequency. A switch is provided for starting the motor. Suitable for operator on 230 Volts, A.C. Single Phase, 50 Cycles.

Note: Table top size : 750 x 750 mm & 1000 x 1000 mm also available at an extra cost. Both models operates on 440 volts, A.C. Three Phase

Product Details:

For making cement concrete prisms or bars of square cross section for flexural strength test. Faces are machined flat to within ±0.02mm and inside dimensions to ±0.2 mm made of Cast Iron or Steel, supplied complete with base plate.

Product Details:

We are instrumental in offering superior quality Vibrating Table.

Specification:

• Proper compaction of cement and concrete while casting specimens for compressive or flexible strength testing essential to achieve a better and more consistent mixture. The cement and concrete vibrating table top has stops along its edges to prevent molds from sliding off the table during operation.

The concrete Vibrating Table are offered in 3 different table top sizes: