Oil & Petroleum Testing Instruments

Product Details:

This apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 80°C as per specification IP 36 and IS: 1448 (P: 69) 1969. The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner, Heating is controlled by means of energy regulator fitted to the apparatus. Suitable for operation on 220 Volts 50 cycles AC Circuits.

Other Details:

• NIC 132 - Cleveland flash point & fire point Apparatus Electrical Heating with Energy Regulator Gas Test Jet
• NIC 133 - With OIL WICK Arrangement
• NIC 134 - - Same as above with - Gas Jet & Oil Wick Arrangement COMBINED Model
• NIC 135 - Cleveland Flash Fire Point App. with Electronic Digital Temp. Indicator and Temp. Regulator Combined
• NIC 136 - Cleveland Flash Fire Point App. with Voltage Varic (Copper Coil)
• NIC 136 A - Automatic Flash & Fire Point App. Membrence key pad to Selection of Disered Flash Point programme. NICid heating stage. Multi Functional Arm for Ignition device. Complete Set.
• NIC 132 a - Thermometer IP 28C (-5°C to 400°C)
• NIC 132 b - Polish Wooden case for NIC - 132, 133, 134 Model
• NIC 132 c - Rexine cover for Dust Protection to NIC-135-136 Model
• NIC 132 d - Spare Cup with Handle
• NIC 132 e -Spare Nichrome element
• NIC 132 f - L.P.G. Test flame container with Valve

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: ROORKEE
• Delivery Time: 15 DAYS

Product Details:

This apparatus is suitable for determining the close cup flash point of petroleum and mixtures according to IP 33 and IP 170 and also IS 1448 (Part I) 1985 (P:20). It is suitable for oils whose flashes below 70° C. It is supplied with oil cup, cover fitted with stirrer, thermometer socket S.S. Water Bath, Stand. An electric heater is fitted at bottom for operation on 220 Volts AC Circuits.

Other Details:

• NIC 120 : Abets Flash Point Apparatus, Elect. Heating with Energy Regulator Control - Oil Test Jet
• NIC 121 : Abels Flash Point App. with Regulator and Digital Temp. Indicator Oil Test Jet
• NIC 122 : -Same as Above- with Geared FHR Elect. Driven Stirrer (120 R.P.M.)
• NIC 123 : Fully Automatic Abel Flash Point apparatus Temp. Range + 5°C to 85°C Micro Processor Controlled with Key Borad for Programming. Gas dst) Prices on Jet System Complete Unit
• NIC 124 : Abel Flash Point Apparatus Temp range -18°C to + 70°C with REFREGERATION SYSTEM asper IP-170 with oil Test Jet System with Digital Temp. Indicator and FHP Motor Stirrer

Optional Accessories:

• NIC 120 a : Abel Oil Cup Thermometer (-35/70°C x 0°5C) IP 74C
• NIC 120 b : Abel Water Bath Thermometer (-30/80°C x 0°5C) IP75C
• NIC 120 c : Polish Wooden case
• NIC 120 d : Spare cup for above Apparatus
• NIC 120 e : Spare top (Cover Assemble) with Shutter mechanism
• NIC 120 f : Spare Nichrome Heating element

Product Details:

This apparatus is made as per IP 34, ASTMD-93 and IS 1448 (Part I) 1270 (P.21) and IS 1209-1953 method B. Used for finding out Flash Point above 70 °C and below 300° C. The Instrument having Oil Test Jet/Gas Test Jet Flame Device, stirrer with flexible shaft. The Assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated Handle and locking arrangement near Cup flange. The assemble is kept on round shape electric heater with Seperate temp.regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits

Other Details:

• NIC 125 - P. M. Flash Point App. Elect. Heated with Energy Regulator Oil Test Jet
• NIC 126 - -- Same as above -J Elect. Heated With Concealed Hot Plate & Oil Test Jet
• NIC 127 - P. M. Flash Point App. with Electronic Temp. Indicator and Regulator Oil Test Jet
• NIC 128 - P. M. Flash Point App. Elect. With energy Regulator, Geared Motor Stirrer (120 R.P.M.) Oil Test Jet
• NIC 129 - Pensky Martens Flash Point App. with Electronic voltage Variac and Digital Temp. Indicator and Constant Speed. Stirring device Oil Test Jet
• NIC 130 - Semi Automatic Flash Point Apparatus with Electronic Temp. Controller, Automatic Dipping cycle with Remote Control Oil Test Jet or Gas Test Jet.
• NIC 131 - Fully Automatic Flash Point App. Micro Controller based with LCD Display Temp. Range form 80°C to 350 °C 0.°1c Direct Resolution. Automatic Stirrer Gas Test Jet System.

Request Note:

• All above models can be supplied with \\\"Gas Test Jet\\\" system with Reducing Valve in place of Oil Jet Flame at extra cost.

Optional Accessories:

• NIC 125 a - Openclip for Converting Close Model To Open Cup test Model as per IP 35
• NIC 125 b - IP 15C Low range (-7/110°Cx0°5C) thermometer
• NIC 125 c - IP 16C High range (90x370°Cx2°C) thermometer
• NIC 125 d - Polish wooden case
• NIC 125 e - Spare Cup with Handle
• NIC 125 f - Spare Cover Assembly
• NIC 125 g - Spare Nichrome heating element

Product Details:

For determination of softening point of bituminious materials according to IP 58 and IS 1205-1958. Softening point is that temperature at which the speciman under test becomes soft enough to allow a steel ball of specific dimensions to fall a required distance under test condition. The apparatus consists of glass beaker, ring Stand, two steel balls with rings and ball guides, hand Stirrer.

Other Details:

• NIC 161 - Softening Point Apparatus (without Glass Beaker)
• NIC 162 - Softenting Point Apparatus with glass Beaker
• NIC 163 A - Softening Point Apparatus with F.H.P. elect.motor driven Stirrer and electric heater with Energy. Regulator Control.
• NIC 163 B - ---Same as Above--- with DIGITAL TEMP. CONTROLLER UNIT
• NIC 161 a - Thermometer IP 60C
• NIC 161 b - Thermometer IP 61 C
• NIC 161 c - Spare Ring with Ball-Centring Guide and Steel Ball (pack of 2)

Additional Information:

• Item Code: NIC-228

Product Details:

It is used for determination of calorific value of liquid & Solid fuels.T Instrument consists S.S. Body made out of corrosion resisting stainless steel Rod cap. 300 ml, Calorimeter vessel, outer Jack with insulated Body, offset stirrer, S.S. Crucible, pellet press, ignite wire, pressure gauge, with flexible pipes. with electronic firing unit.

Details:

• NIC 145 A - BOMB CALORIMETER APR DIGITAL Thermo Meter 0.1°C Readout
• NIC 145 B - Same as above with Digital Thermo Meter of 0.03°C Readout and Remote control system
• NIC 146 A - BOMB CALORIMETER App. with 0.01°C Readout with Remote control system and PRINTER UNIT.
• NIC 146 B - Same as above with Micro Processor Unit with PC suitable to use with computer with printer for detection of maximum rise of Temperature resolution 0.01oC LCD display

Optional Accessories:

• NIC 145 a - Spare Bomb 300ml. cap.
• NIC 145 b - Spare Stainless Steel Crucible
• NIC 145 c - Spare Neoprene washer 2, Belt 2, 0 Ring 2, and Valves 5 (Kit)
• NIC 145 d - Spare Nichrome wire 10 Meters Roll

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: ROORKEE
• Production Capacity: 10
• Delivery Time: 15 DAYS

Product Details:

It consists, One Red Wood No.1 cup and One Red Wood No. 2 cup are installed in the bath. The bath is made from S.S. Sheet The temperature is Controlled by Electonic Digital Temperature Controller. The Stirring is done by FHP electric motor in the heating compartment The unit has 2 sets of Oil Cup covers, thermometer Clips and ball valve. Suitable to operate on 220 volts AC Circuits.

Product Details:

Other Details:

• As per IP 212 and ASTMD-490. Used for determining the Viscosity of lubricating and fuel oils.
• NIC 112 - Electrical Heating with energy regulator control
• NIC 112 A - Electrical Heating with Electronic Indicator and Regulator

Optional Accessories:

• NIC 112 a - Engler ASTM 24C Thermometer (39/54°Cx0.2°C)
• NIC 112 b - Engler ASTM 25C Thermometer l(95/105°Cx0.2°C)
• NIC 112 c - Teflon Valve
• NIC 112 d - Spare Wooden Valve
• NIC 112 e - flask 200 ml. capacity
• NIC 112 f - Wooden case for above Apparatus
• NIC 112 g - Spare Heater for above

Product Details:

Made as per ASTMD-88 specifications with Universal and Furol Jets made of Stainless Steel. Stirring is done by hand with turn table arrangement (without Strainer, withdraw) Tube and glass wares). Suitable to operate on 220 Volts AC mains.

Other Details:

• NIC 113 - Elect. Heating with Energy Regulator control
• NIC 113 A - Elect. Heating with Electronic Indicator and Regulator
• NIC 114 - Single Tube Saybolt Viscometer with Control Pannel (Double Walled) Digital Electronic Temp. Controller and F.H.P. Motor Stirrer
• NIC 114 A - ----Same as above---- with Two Tubes Set

Optional Accessories:

• NIC 113 a - Strainer for filtering oil
• NIC 113 b - Withdrawl Tube (Metal)
• NIC 113 c - Spare Cup without Jets
• NIC 113 d - Spare Jet Universal
• NIC 113 e - Spare Jet Furol
• NIC 113 f - Flask 60 cc.
• NIC 113 g - Polish Wooden Case for above App.
• NIC 113 h - ASTM 17C Range 19 to 27°C 0° Thermometer
• NIC 113 i - ASTM 18C Range 34 to 42°C Thermometer
• NIC 113 j - ASTM 19C Range 49 to 57°C Thermometer
• NIC 113 k - ASTM 20C Range 57 to 65°C Thermometer
• NIC 113 l - ASTM 21 C Range 79 to 87°C Thermometer
• NIC 113 m - ASTM 22C Range 95 to 103°C Thermometer
• NIC 113 n - COMMON RANGE Thermometer 0-100°C

Product Details:

This Viscometer bath is used to maintain the correct constant Temperature for estimating kinematic Viscosity of Oils & Petroleum product. In this type of bath Various Viscometers may be fixed as an internal part of bath .The bath is rectangular in shape . Inside tank made of Stainless steel sheet. On two sides toughened glass provided for full visibility of objects. The bath is controlled by an electronic relay and Digital Controller Temperature range 5°C above room temperature to 100° C. Accuracy ± 0.1 °C Stirring is done by a F.H.P. elect. motor stirrer. It is Supplied with Viscometer tube holders and S.S. cover.

Optional Accessories:

• NIC-115 - Kinematic Viscometer Bath of chamber Size 12\\\"x9\\\"x12\\\" deep for 4 Viscometer with Digital Temp. Indicator & Controller
• NIC-116 - Kinematic Viscometer Bath Chamber Size 12\\\"x12\\\"x12\\\" deep for 6 Viscometers with Digital T,mp. Indicator & controller.
• NIC-117 - Kinematic Viscometer Bath with REFRIGERATION SYSTEM. Temp Range 0°C to 100°C
• NIC-118 - Kinematic Viscometer to accommodate 3 Glass Viscometer Tubes with round glass Vessel. Digital Temp. Controller with Indicator. Suitable up to 120°C Temp. accuracy ±0.1°C.
• NIC 115 a - Viscometer U tube BS/U Size A, B, C, D, E, F, G & H
• NIC 115 b - Viscometer U Tube Reverse Flow (For Opaque Liquids) SIZE 2, 3, 4, 5, 6,7, 8 9, 10 & 11
• NIC 115 c - Viscometer Cannon Fenske, Direct Flow BS/IP/CF Viscosity Range SIZE 25, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500 & 600
• NIC 115 d - Viscometer Cannon Fenske Reverse Flow SIZE 100, 150, 200, 300, 350, 400, 450, 500 & 600
• NIC 115 e - Viscometer Suspended level BS/IP/SL SIZE 1, 1A, 2, 2A, 3, 3A, 4
• NIC 115 f - Spare Viscometer Holder
• NIC 115 g - Electronic Stop Watch
• NIC 115 h - Stop Clock Table Model
• NIC 115 i - Lighting Attachment

Product Details:

This apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 80°C as per specification IP 36 and IS: 1448 (P: 69) 1969. The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner, Heating is controlled by means of energy regulator fitted to the apparatus. Suitable for operation on 220 Volts 50 cycles AC Circuits.

Other Details:

• NIC 132 - Cleveland flash point & fire point Apparatus Electrical Heating with Energy Regulator Gas Test Jet
• NIC 133 - With OIL WICK Arrangement
• NIC 134 - - Same as above with - Gas Jet & Oil Wick Arrangement COMBINED Model
• NIC 135 - Cleveland Flash Fire Point App. with Electronic Digital Temp. Indicator and Temp. Regulator Combined
• NIC 136 - Cleveland Flash Fire Point App. with Voltage Varic (Copper Coil)
• NIC 136 A - Automatic Flash & Fire Point App. Membrence key pad to Selection of Disered Flash Point programme. NICid heating stage. Multi Functional Arm for Ignition device. Complete Set.
• NIC 132 a - Thermometer IP 28C (-5°C to 400°C)
• NIC 132 b - Polish Wooden case for NIC - 132, 133, 134 Model
• NIC 132 c - Rexine cover for Dust Protection to NIC-135-136 Model
• NIC 132 d - Spare Cup with Handle
• NIC 132 e -Spare Nichrome element
• NIC 132 f - L.P.G. Test flame container with Valve

Product Details:

This apparatus is used for penetration test on a wide variety of materials. It consists of a head Support mounted on a vertical rod which can be adjusted for height. A rack and pinion and pointer assembly provides fine adjustment of needle tip to Sample and in Corporates a Slipping clutch mechanism which make reading of penetration and subsequent resetting a sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter Sub Division. The Instrument is supplied with two sample containers & 2 Wts.

Other Details:

• NIC 137 - Penetrometer with containers and weights having peneteration Needle. (Bitumen)
• NIC 138 A - Penetrometer Apparatus with containers and weights having peneteration CONE HOLLOW type (Grease)
• NIC 138 B - -Same as above - but with Geared arrangement for moving the arm with geared unit
• NIC 139 A - Penetrometer with Brass Cone & Needle With DIGITAL TIMMER DEVICE (Adjustable)
• NIC 139 B - --- Same as above --- but with Geared arrangement for moving the arm with geared unit

Optional Accessories:

• NIC 137 a - Spare penetration Needle (Pack of Two)
• NIC 137 b - Spare penetration solid cone
• NIC 137 c - Spare penetration Brass hollow cone
• NIC 137 d - Grease worker hand operated
• NIC 137 e - Grease worker hand operated Big Handle (Lever Type)
• NIC 137 f - Grease cutter as per IP 50
• NIC 137 g - Transfer Dish

Product Details:

This apparatus is used for determinations of distillation characteristics of petroleum products . The instrument consists of metal shield to support distillation flask with GEARED HEIGHT ADJUSTABLE DEVICE. It has a slot for vapour tube. A glass window is provided in front side for clear view of inside objects. It also has cooling bath or condenser with M.S. black painted stand. Electrically heated. The instrument is supplied with two square asbestos board with 50 mm and 70 mm holes. (without glass wares)

Other Details:

• NIC 140 - Single Distillation Apparatus electrically heated with energy Regulator with Gear device
• NIC 141 - Single Distillation Apparatus with Energy Regulator and Digital Temp. Indicator with Gear device
• NIC 142 - Twin (Duplex) Distillation Apparatus elect. Heated model with two energy Regulators with Gear device
• NIC 143 - Twin (Duplex) Distillation Apparatus with Electonic Regulator and Digital Temp. Indicator with Gear Device
• NIC 144 -Distillation Apparatus for Crude Petrloeum as per IP-24 with One glass Condensor Elect., with Energy regulator control CESSORIES.

Optional Accessories:

• NIC 140 a - Distillation Flask 125ml
• NIC 140 b - Distillation Flask 250ml
• NIC 140 c - Measuring Receiver 100 ml
• NIC 140 d - spare Asbestos Board 38mm or 50 mm or 70 mm Dia Hole.
• NIC 140 e -Thermometer IP 5C (-2/3000Cx1C)
• NIC 140 f - Thermometer IP 6C (-2/4000Cx1C)

Product Details:

The instrument consists of Calorimeter with Burner on Tripod stand, Gas flow meter (Non recording type) and pressure Governor. The Calorimeter measures the calorific value of gaseous fuels from 120 B.Th.U. to 3000 B.Th.U. (1000 to 26000 K.Cal./Cu Meter). It also consists, measuring Jar of 2 Lit. cap. and 50 ml. cap. with rubber tubing for gas water connection.

Other Details:

• NIC 147 A - Junkers Gas Calorimeter App. with 2 Nos. Thermometers
• NIC 147 B - Same as above with digital Temp. Indicators for measuring outlet temperature.

Additional Information:

• Item Code: NIC-11111

Product Details:

It is made as per IP 13, ASTM D- 189 Specifications . It is useful to determine amount of Carbon Residue when an oil is evaporated under Specified Conditions. The apparatus consists of spun sheet iron crucible 25 c c Capacity, Sheet Iron hood and sheet iron block on a stand, gas Burnor.

Other Details:

• NIC 150 A - Conradson Carbon Residue single Test Apparatus (Gas Burner)
• NIC 150 B - Elect. Heating With Energy Regulator Control
• NIC 151 A - Conradson Carbon Residue Four Test App. (Gas Burner)
• NIC 151 B - -same as above- but Elect Heating with Separate Energy Regulator Controls

Additional Information:

• Item Code: NIC-585
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: ROORKEE

Product Details:

This is made according to specification laid by IP 15 & IS 1448 (P : 10) 1970. The pour point is lowest temperature at which the oil will just fail to flow. The apparatus Consists main cooling bath made out of S.S. sheet and stand unit with drain plug and cover has provision for fitting thermometer and a filling aperture for adding freezing mixture. A Glass jar for containing oils, Jacket, disc and gasket as specified are also provided.

Other Details:

• NIC 152 - Cloud & Pour Point Single Test with Insulated Body
• NIC 153 - Cloud & Pour Point Two Test with Insulated Body
• NIC 154 - Cloud & Pour Point Four Test with Insulated Body
• NIC 155 - Cloud & Pour Point Six Test with Insulated Body
• NIC 156 - Cloud & Pour Point App. WITH REFRIGERATION SYSTEM (for 2 test App.) Temp. upto - 30°C.

Optional Accessories:

• NIC 152 a - Cloud & Pour Point Thermometer IP IC
• NIC 152 b - Cloud & Pour Point Thermometer IP 2C
• NIC 152 c - Spare Glass Jar with cork
• NIC 152 d - Spare Metal Jacket with Disc.
• NIC 152 e - Polish wooden case for - Single Test, Four Test, Six Test
• NIC 152 f - Rexine Dust Cover for refrigeration Unit

Product Details:

This apparatus consists of a cylindrical block of Aluminium with a built in electrical heating element.The mounted Alum. block illuminates from below by a lamp fixed in its housing. The aluminium block accept three capillary tubes and mercury thermometer.The temperature is controlled by rotary switch. The magnifying lense provided for viewing objects clear. Suitable for operation on 220 Volts AC circuits

Other Details:

• NIC 166 - Melting Point Apparatus
• NIC 167 - Melting Point App. Digital Temp. Indicator with Cooling Plug
• NIC 166 a - IP 63C Thermometer

Additional Information:

• Item Code: NIC-3333

Product Details:

Made as per IP 69 & IS 1448 (P: 39). 1967 elect. Heated with FHP motor Stirrer temp. controlled by Electronic Digital Temp. Controller. The apparatus consists one air chamber, one Liquid Chamber without cock and pressure gauge.

Other Details:

• NIC 157 - Single Test Bath
• NIC 158 - Double Test Bath
• NIC 157 a - Liquid Chamber with Cock (if Required)
• NIC 157 b - Spare Airchamber only NIC 157 c NP Pressure Gauge 0-1 Kg. / Cm2

Additional Information:

• Item Code: NIC-4444

Product Details:

Double walled stainless steel chamber bath outer chamber made of mild steel sheet attractive painted. As per IP 154 and IS 1448 (P - 15) to accomodate 3 & 6 Bombs. Temperature is controlled by Electronic Digital Controller (Without S.S. Bomb)

Other Details:

• NIC 159 - Water Bath for 3 S.S. Bombs
• NIC 160 - Water Bath for 6 S.S. Bombs
• NIC 159 a - Stainless Steel Bomb
• NIC 159 b - Vice Single Strip
• NIC 159 c - Vice Four Strip
• NIC 159 d - Copper Strip (pack of 3)
• NIC 159 e - Test Tube
• NIC 159 f - Copper Strip Compariscin Chart (Indigenous)
• NIC 159 g - Inspection tube (Flat)

Additional Information:

• Item Code: NIC-6666
• Port of Dispatch: ROORKEE

Product Details:

Other Details:

• NIC 168 : Aniline point apparatus as per IP 2 & IS 1448 (P-3) ASTM D 611 method A complete with jaket (without thermometer)
• NIC 169 : Aniline point apparatus as per IP-2 method B ASTM D 611 by thin film method B Elec. heated with elect. stirrer (without thermometer) * Spare tap * Spare Contraction chamber * Spare metal stirrer
• NIC 170 : Aniline point app. as per IP-2 method \'D\' by U-tube method elect. heated with FHP stirrer without thermometer * Spare \'U\' tube Aniline point thermoter IP 20C Aniline point thermoter IP 21 C
• Br> NIC 171 : Dean & stark app. for estimation of moisture in lubricating oils as per IP-74, ASTM D 95 with one 10 cc receiver Flask, Condensor with Clamp Holder. and Heater with Regulator

Additional Information:

• Item Code: NIC-9999

Product Details:

Orsat Gas Analysis app with three absorption pipettes of two compartment type,100ml Gas burette with outer jacket,manifold with stopcocks and aspirator bottle,for the analysis of CO,O2,Co2 particularly in fuel and furnace gases,complete in wooden cabinet with sliding doors.Chemical to be arranged by the user.

Additional Information:

• Item Code: NIC-098

Product Details:

Other Details:

• NIC 172 - Smoke Point Apparatus as per IP 57 & IS 1448 (P-31) & ASTM D 1322
• NIC 172 a - Spare Candle
• NIC 172 b - Spare Wick

Additional Information:

• Item Code: NIC-088

Product Details:

These viscometers are designed for viscosity tests of petroleum products.They confirm to requirements of IP 70 (Former). two adaption of Red Wood Viscometer are available No.1 for liquids having Red Wood flow 20 seconds to 2000 seconds and No.II for liquids whose flow time exceeds 2000 seconds.The complete Out fit comprises stainless steel bath with electrical heating arrangment suitable to operate at 220 Volts AC Mains with tap,oil cup with precision stailess steel jet,cup cover,ball valve,thermometer-clip,Stirrer and M.S.sheet stand

Special Feature:

• S.S.
• Bath made of Spun Sheet one piece Joint less.

Redwood Viscometer No.1

• Electrically Heated with Energy regulator control
• Electrically Heated with Digital Indicator and Regulator
• Electrically Heated with Voltage varrier(Copper coil) with Electronic Digital Indicator and Controller & FHP Motor Stirrer with lightning Arrangement.

Redwood viscometer no.II

• Electrically Heated with Energy regulator control
• Electrically Heated with Digital Indicator and Regulator
• Electrically Heated with Voltage varrier(Copper coil)Digital Indicator and Controller & FHP Motor Stirrer with lightning Arrangement.

Additional Information:

• Item Code: NIC-701
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: ROORKEE

Product Details:

Tar Viscometer Apparatus as per IP 72 and is 1206 standards. It is used for determination the viscosity of road oils and cut back bitumen. It consists S.S. Bath with cup of 10 mm or 4mm orifice and sleeve, Stirrer with lifting clip and ball. The assembly kept on Suitable stand with leveling Screws. Suitable to operate on 220 Volts AC Mains.

Other Details:

• Electrical Heating with energy Regulator Control
• Electrical Heating with Digital Indicator and Regulator
• Electrical Heating with Voltage Varrier (Copper Coil)

Tar 3:

• Tar Viscometer Multiple Apparatus Consist 2 Cups In A S.S. Water Bath Mounted On Stand With Levelling Feet. Fitted With 1000 Watts Heater. Temperature Is Controlled By Digital Electronic Controller With F.H.P. Electric Motor Stirrer. Supplied With One Tar Cup Lomm And One 4 Mm Orifice With Valves. Tar Viscometer Multiple Apparatus

Optional Accessories:

• Spare Silver Plated Cup 10mm or 4mm orifice
• Measuring Cylinder 100 ml cap.
• IP8C (0/45°CX0.2°C) Low Range Thermometer
• IP9C (40x85°Cx.2°C) Medium Range Thermometer
• IPI OC (76x122°Cx0.2°C) High Range Thermometer
• Polish Wooden case RAP 110 g Spare Heater 400 W
• Electronic Stop Watch

Product Details:

This apparatus is used for penetration test on a wide variety of materials. It consists of a head Support mounted on a vertical rod which can be adjusted for height. A rack and pinion and pointer assembly provides fine adjustment of needle tip to Sample and in Corporates a Slipping clutch mechanism which make reading of penetration and subsequent resetting a sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter Sub Division. The Instrument is supplied with two sample containers & 2 Wts.

Other Details:

• NIC 137 - Penetrometer with containers and weights having peneteration Needle. (Bitumen)
• NIC 138 A - Penetrometer Apparatus with containers and weights having peneteration CONE HOLLOW type (Grease)
• NIC 138 B - -Same as above - but with Geared arrangement for moving the arm with geared unit
• NIC 139 A - Penetrometer with Brass Cone & Needle With DIGITAL TIMMER DEVICE (Adjustable)
• NIC 139 B - --- Same as above --- but with Geared arrangement for moving the arm with geared unit

Optional Accessories:

• NIC 137 a - Spare penetration Needle (Pack of Two)
• NIC 137 b - Spare penetration solid cone
• NIC 137 c - Spare penetration Brass hollow cone
• NIC 137 d - Grease worker hand operated
• NIC 137 e - Grease worker hand operated Big Handle (Lever Type)
• NIC 137 f - Grease cutter as per IP 50
• NIC 137 g - Transfer Dish

Additional Information:

• Item Code: NIC-7777